header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
CENTRIFUGAL BLOWERS
CRT 010 SERIES
 
CRT 07/072/073
CRTP 072 Series
CRT 010 Series
 
Clicca per ingrandire Download Brochure - PDF file
Download Brochure - ZIP file

alert
Please note:
All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single suction centrifugal blower;
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil;
100 mm diameter, constant thickness impeller with forward curved blades, made of black nylon reinforced with fiber glass;
housing made of black nylon reinforced with fibreglass.
 
On request:
motor with different powers and insulation classes: 155 “F” - 180 “H”;
97 mm diameter aluminum impeller;
"BB" version with 2 626 ZZ type ball bearings on the motor;
supply voltage from 12V to 400V 50/60Hz;
"HT" version for operation in high temperature;
version with dual voltage and/or double rotation speed;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
thermal protector and/or thermal fuse;
end-shields with “IP50” protection class;
motor cover made of nylon reinforced with fibreglass;
different motor positions.
 
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

top
Product Identification Code
(point your mouse on the item to view details)
 
CRT10 a richiestaa richiestaposizione fastona richiesta protezione termica a richiesta CRT10
top

Faston position (table 1) 
posizione
top

Dimensions
dimensioni
The dimensions are in millimeters
top

CRT 10 versions
 
top

Typical curves
curve
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08