header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
CENTRIFUGAL BLOWERS
CRT 05 / N36 SERIES
 
CRT 07/072/073
CRTP 072 Series
CRT 010 Series
 
Mod. CRT05/N36 36
Clicca per ingrandire
 
Mod. CRT05/N36 1P
Clicca per ingrandire
 
Mod. CRT05/N36 32
Clicca per ingrandire
 

Mod. CRT05/N36 41

Clicca per ingrandire
 
Clicca per ingrandire Download Brochure - PDF fileDownload Brochure - ZIP file

alert
Please note:

All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single suction centrifugal blower;
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
115V/60Hz version, UL-CSA approved, FILE E204506, 105 "A" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +40°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil;
55mm diameter, constant thickness impeller with forward curved blades, made of black nylon reinforced with fiber glass;
housing made of black nylon reinforced with fiber glass, with different coupling flanges on the suction side (see table 2).
 
On request:
version with IMQ - CSV approved motor;
motor with different powers and insulation classes: 155 “F” - 180 “H”;;
"BB" version with 2 626 ZZ type ball bearings on the motor;
supply voltage from 12V to 400V 50/60Hz;
version with dual voltage and/or double rotation speed;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
thermal protector and/or thermal fuse;
end-shields with “IP50” protection class;
different motor positions.
 
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

 
top
Product Identification Code
(point your mouse on the item to view details)
 
CRT05 Visualizza le versioni Visualizza la posizione dei faston
 
top

Faston position (table 1) 
posizione
top

Dimensions
dimensioni
The dimensions are in millimeters
top

Versions (table 2) 
versioni
The dimensions are in millimeters
top

CRT 05 versions
 
top

Typical curve
curva
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
Visualizza le versioni Visualizza la posizione dei faston a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08