header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
CENTRIFUGAL BLOWERS
CRT 07/072/073 - CRTP 072 SERIES
 
CRT 07/072/073
CRTP 072 Series
CRT 010 Series
 
Clicca per ingrandire
Mod. CRTP072 on request
 
Clicca per ingrandire Download Brochure - PDF fileDownload Brochure - ZIP file

alert
Please note:

All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single suction centrifugal blower;
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
constant thickness impeller with forward curved blades made of black nylon with fiber glass;
housing made of die-cast aluminium;
motor coupling flange made of pre-galvanized metal sheet;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil (see table 1).
 
On request:
version with IMQ - CSV approved motor;
motor with different powers and insulation classes: 155 “F” - 180 “H”;
aluminium impeller with forward curved blades;
Protection against dust and/or humidity;
end-shields with “IP50” protection class;
motor coil winding with IP55 protection;
electrical connection by means of different cable lengths;
supply voltage from 12V to 400V 50/60Hz;
double speed and/or dual voltage version;
motor cover made of black nylon reinforced with fibreglass;
thermal protector and/or thermal fuse;
built in compliance with UL-CSA standards;
version with double shield ball bearings (ZZ);
housing made of black nylon reinforced with fibreglass;
CRTP072 code (see table 2).
 
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

top
Product Identification Code
(point your mouse on the item to view details)
 
CRT10 a richiestaa richiestaposizione fastona richiesta protezione termica a richiesta CRT10
top

Faston position (table 1) 
posizione
top

Dimensions
Copyright © Coprel s.a.s.
The dimensions are in millimeters
top

CRTP 072 (table 2) 
Copyright © Coprel s.a.s.
The dimensions are in millimeters
top

CRT 07 versions
 
top

Typical curves
 
CRT 07
curva 07

CRT 072
 
curva 072

CRT 072 P
 
curva 072P

CRT 073
 
curva 073
 
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08