All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with 130 "B" insulation class (155°C);
motor coil winding with IP55 protection;
driving shaft in AISI 304 - 303 stainless steel;
electrical connection by means of three-pole cable of 1.00 metre length.
power cable of various lengths;
end-shields with “IP50” protection class;
motor coil with IPX0 protection;
supply voltage from 12V to 400V 50/60Hz;
thermal protector or thermal fuse;
fastening with small brass terminals;
built in compliance with UL-CSA standards;
version with double shield ball bearings (ZZ).
OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS
The dimensions are in millimeters
All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.