header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
MOTORS
P SERIES
 
 
 
 
Clicca per ingrandire Download Brochure - PDF file
Download Brochure - ZIP file

alert
Please note:

All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6.3,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil (see table 1); (see table 1);
61 x 61 mm stator lamination;
4.5 mm. or 6 mm. diameter driving shafts.
 
On request:
IMQ-CSV approved version;
supply voltage from 12V to 400V, 50 or 60Hz;
motor with different powers and insulation classes: 155 “F” - 180 “H”;
protection against dust and/or humidity;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
end-shields with IP50 protection or with different shapes;
double speed and/or dual voltage version;
thermal protector and/or thermal fuse;
spacers of various lengths and/or protruding screws for motor wall mounting;
built in compliance with UL-CSA standards;
version with double shield ball bearings (ZZ);
cooling fan;
61x64 mm stator lamination (E series), 10 to 40 mm motor stack height, of different powers;
driving shaft built to customers design;
electrical connection by 4.8 x 0.8mm, male faston-type connectors, directly fixed on coil;
stator with cataphoresis coating.
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

top

Product Identification Code
(point your mouse on the item to view details)
 
serie P a richiesta a richiesta a richiesta protezione termica a richiesta posizione faston a richiesta a richiesta serie P
 
* Impregnated versions:
IV Version: impregnated coil through dip-coating using epoxy transparent paint (standard stator coil dip-coating process).
PRN version: coil coated with black epoxy resin, the coil is protected by a clearly visible layer of resin.
IM Version: impregnated coil through dip-coating using transparent epoxy paint with silicone applied on contacts at the end of winding, three-pole wire and coil covered by a nylon cap. The coil is not buried in the resin but visible; caution should be paid when mounting the motor so that the cap open part faces downward to prevent its filling up with condensate.
INC Version: coil with IP55 protection, the coil is completely buried into the epoxy resin.
top

Faston position (table 1) 
(Facing shaft)
faston P
top

P dimensions
dimensioni P
On request 2x4 MA
 
The dimensions are in millimeters
top

P versions
 
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
a richiesta protezione termica posizione faston a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08