header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
CENTRIFUGAL BLOWERS
RS SERIES
 
RS Series
 
 
 
 
 
 
 
 
Clicca per ingrandire Download Brochure - PDF file
Download Brochure - ZIP file

alert
Please note:

All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single suction centrifugal blower;
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil;;
single suction, 67 - 76 - 97 diameter, constant thickness aluminium impeller with forward curved blades;
housing made of pre-galvanized metal sheet.
 
On request:
version with IMQ - CSV approved motor;
fan blades of various diameters and heights;
motor with different powers and insulation classes: 155 “F” - 180 “H”;
"BB" version with 2 626 ZZ type ball bearings on the motor;
supply voltage from 12V to 400V 50/60Hz;
"HT" version for operation in high temperature;
version with dual voltage and/or double rotation speed;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
thermal protector and/or thermal fuse;
end-shields with “IP50” protection class;
housing with cataphoresis coating;
built in compliance with UL-CSA standards;
different motor positions.
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

 
top

Product Identification Code
(point your mouse on the item to view details)
RS lf serie posizione faston serie serie serie serie serie RS rg
(*) Impregnated versions:
IV Version: impregnated coil through dip-coating using epoxy transparent paint (standard stator coil dip-coating process).
PRN version: coil coated with black epoxy resin, the coil is protected by a clearly visible layer of resin.
IM Version: impregnated coil through dip-coating using transparent epoxy paint with silicone applied on contacts at the end of winding, three-pole wire and coil covered by a nylon cap. The coil is not buried in the resin but visible; caution should be paid when mounting the motor so that the cap open part faces downward to prevent its filling up with condensate.
INC Version: coil with IP55 protection, the coil is completely buried into the epoxy resin.
top

Motor position -radial faston-type connectors (table 1) 
assiali
 
Motor position -axial faston-type connectors (table 2)
 
raadiali
top

 
serie RS
 
top

RS dimensions
dimensioni
The dimensions are in millimeters
top

RS versions
 
top

Typical curves
RS 67/22
 
curva 67-22
 

RS 76/42
 
curva 76-42
 

RS 85/42
 
RS 85 42
 

RS 97/52
 
curva 97-52
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08