All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil;
constant thickness Ø 65 mm aluminium impeller with forward curved blades fitted with intermediate reinforcement discs;
housing made of pre-galvanized metal sheet.
version with IMQ - CSV approved motor;
motor with different powers and insulation classes: 155 “F” - 180 “H”;
supply voltage from 12V to 400V 50/60Hz;
version with dual voltage and/or double rotation speed;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
protection against dust and/or humidity;
thermal protector and/or thermal fuse;
housing with cataphoresis coating;
"HT" version for operation from -30 ° C to 100 ° C;
built in compliance with UL-CSA standards;
"BB" version with 2 626 ZZ type ball bearings on the motor;
cooling fan on the motor.
OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS
Product Identification Code
(point your mouse on the item to view details)
IV Version: impregnated coil through dip-coating using epoxy transparent paint (standard stator coil dip-coating process).
PRN version: coil coated with black epoxy resin, the coil is protected by a clearly visible layer of resin.
IM Version: impregnated coil through dip-coating using transparent epoxy paint with silicone applied on contacts at the end of winding, three-pole wire and coil covered by a nylon cap. The coil is not buried in the resin but visible; caution should be paid when mounting the motor so that the cap open part faces downward to prevent its filling up with condensate.
INC Version: coil with IP55 protection, the coil is completely buried into the epoxy resin.
Motor position -radial faston-type connectors (table 1)
Motor position -axial faston-type connectors (table 2)