header 01 prodotti header 03 header 04
homedovecontattiheader 05
header 06
     
 
 
CROSS-FLOW FANS
TF/FF SERIES
 
TFD/FFD Series
TF 45 Series
TFD 45 Series
TF/FF 65 Series
TF/FF 80 Series
 
 
Clicca per ingrandire
FF versions
 
Clicca per ingrandire
"ears"
 
Clicca per ingrandire Download Brochure - PDF file
Download Brochure - ZIP file

alert
Please note:

All images, graphics
and photographs are
copyrighted by Coprel S.r.l.
Technical specifications:
single phase, 2-shaded poles, impedance protected motor, built according to the "CE" mark requirements, in compliance with EN 60335-1 standard, with self-aligning and self lubricating sleeve bearings with big oil reservoir;
motor with minimum 130 "B" insulation class;
suitable for continuous operation in ambient temperature from -10°C to +50°C;
electrical connection by 6,3x0,8mm, radial or axial, male faston-type connectors, directly fixed on coil;
constant thickness Ø 60 mm aluminium impeller with forward curved blades fitted with intermediate reinforcement discs;
housing made of pre-galvanized metal sheet, designed to ensure high aeraulic efficiency and low noise level.
 
On request:
version with IMQ - CSV approved motor;
motor with different powers and insulation classes: 155 “F” - 180 “H”;;
supply voltage from 12V to 400V 50/60Hz;
version with dual voltage and/or double rotation speed;
electrical connection by means of different cable lengths;
motor coil winding with IP55 protection;
protection against dust and/or humidity;
thermal protector and/or thermal fuse;
housing with black cataphoresis coating;
several "HT" versions for operation from -30° C to 100° C;
built in compliance with UL-CSA standards;
version fitted with ball bearings;
version built to customers design.
 
top

OUR TECHNICAL AND COMMERCIAL OFFICE
CAN ADVISE YOU ON THE VERSION THAT MOST SUITS YOUR APPLICATION NEEDS

 
top

Product Identification Code
(point your mouse on the item to view details)
 
TF FF posizione fastonserieserieserieserieserieserieserie serie TF FF
 
* Impregnated versions:
IV Version: impregnated coil through dip-coating using epoxy transparent paint (standard stator coil dip-coating process).
PRN version: coil coated with black epoxy resin, the coil is protected by a clearly visible layer of resin.
IM Version: impregnated coil through dip-coating using transparent epoxy paint with silicone applied on contacts at the end of winding, three-pole wire and coil covered by a nylon cap. The coil is not buried in the resin but visible; caution should be paid when mounting the motor so that the cap open part faces downward to prevent its filling up with condensate.
INC Version: coil with IP55 protection, the coil is completely buried into the epoxy resin.
top

Motor position -radial faston-type connectors (table 1) 
radiale
 

Motor position -axial faston-type connectors (table 2)
assiale
 
top

TF dimensions
Dimensioni TF
The dimensions are in millimeters
top

TF versions
 
top

FF dimensions
Dimensioni TF
The dimensions are in millimeters
top

FF versions
 
top

Typical curves
 
TF/FF 90
 
curva 90
 

TF/FF 120
 
curva 120

TF/FF 180
 
curva 180
 

TF/FF 240
 
curva 240
 

TF/FF 270
 
curva 270
 

TF/FF 300
 
curva 300
 

TF/FF 360
 
curva 360
 

TF/FF 420
 
curva 420
 

TF/FF 480
curva 480
top

All Coprel motors and fans are manufactured in our factory in Pieve Emanuele. Dimensions and specifications data can change. Changes can be made any time, as we may deem feet.
a richiesta a richiesta a richiesta posizione motore connessione elettrica protezione termica altezza pacco statore lunghezza nominale ventola posizione motore serie
posizione motore

 

 
footer 08